Square Footage Calculator
Measure exact square footage for rectangular spaces, multi-room layouts, and L-shaped floor plans with custom flooring and tile waste allowances.
How to Use the Square Footage Calculator
Use a tape measure to record the length and width of your room in feet or meters along the longest flat wall.
Choose Single Rectangle for standard four-wall spaces, or L-Shaped Room to split composite layouts into two clean boxes.
Add a 10% to 15% allowance to accommodate corner trimming, end cuts, and accidental breakage when ordering materials.
Use the copied total in square feet or square yards when placing orders at your flooring, sod, or drywall supplier.
Formula & Calculation Logic
Square footage measures two-dimensional area. For any standard rectangle, multiply the length in feet by the width in feet. When working with inches, divide the inch measurement by 12 first (e.g., 10 ft 6 in is 10.5 ft). To convert square feet to square yards for carpet, divide the square footage by 9.
Worked Example
Master Bedroom Hardwood Flooring Calculation
Imagine calculating flooring for a bedroom measuring 15 feet long by 12 feet wide. First, multiply 15 × 12 = 180 square feet of net floor space. Because hardwood planks require perimeter expansion gaps and end-of-row trimming, add a standard 10% waste buffer: 180 × 1.10 = 198 square feet. You should purchase 198 square feet of flooring (approximately 9 to 10 boxes, depending on carton coverage).
Visual Explanation Diagram
Floor plan showing length and width of a room and an L-shaped room split into two rectangles
Frequently Asked Questions
Convert the inches to a decimal by dividing by 12 before multiplying. For example, a room that is 14 feet 6 inches by 11 feet 3 inches equals 14.5 feet multiplied by 11.25 feet, which equals 163.13 square feet.
The flooring industry recommends a 10% waste buffer for standard straight patterns. If you are laying tile on a 45-degree diagonal, herringbone pattern, or working with complex stone cuts, increase the waste factor to 15% or 20%.
There are exactly 9 square feet in 1 square yard. A square yard measures 3 feet (1 yard) on each side, so 3 ft × 3 ft = 9 sq ft. To convert square feet to square yards, divide by 9.
Break the irregular room into smaller geometric shapes (rectangles and triangles). Calculate the square footage of each separate section, then add the totals together.
Common Square Footage Calculations
Use this square footage calculator for every common measuring job — rooms, flooring, land, and oddly shaped spaces. It handles mixed units and converts your total into the figures suppliers actually ask for.
- Square footage with feet and inches: enter dimensions in feet and inches and the calculator converts them automatically (10 ft 6 in = 10.5 ft) before multiplying.
- Square footage for flooring and tile: add a 10–20% waste factor so you order enough hardwood, laminate, carpet, or tile for cuts and breakage.
- Irregular or odd-shaped rooms: split an L-shaped or odd-shape room into rectangles, calculate each, and add them together for the total square footage.
- Square footage to square yards: divide square feet by 9 to get square yards for carpet ordering.
- Square footage to acres: divide square feet by 43,560 to convert a lot or parcel into acreage.